Add tech files

scripts/scripts_aux/XFAB180_MMMC.tcl

@@ -0,0 +1,87 @@
+### Technology:			"X-FAB 180 nm CMOS, XT018 1243"
+### Library:			"D_CELLS_HD, 1.8V"
+### Tools:			"Cadence Encounter"
+###
+### Stage:			"PaR"
+### File description:		"Multi-mode multi-corner (MMMC) file for the Cadence Encounter EDA tool"
+
+
+## Timing constraints file from the synthesis
+create_constraint_mode -name CONSTRAINTS -sdc_files ${PAR_SDC_PATH}/${PAR_SDC_TOP_NAME}
+
+
+## Create timing libraries sets
+# The slowest corner
+create_library_set -name SLOWlib \
+-timing {/Cadence/Libs/X_FAB/XKIT/xt018/diglibs/D_CELLS_HD/v4_0/liberty_LP5MOS/v4_0_0/PVT_1_80V_range/D_CELLS_HD_LP5MOS_slow_1_62V_175C.lib}
+
+# Typical corner
+create_library_set -name TYPlib \
+-timing {/Cadence/Libs/X_FAB/XKIT/xt018/diglibs/D_CELLS_HD/v4_0/liberty_LP5MOS/v4_0_0/PVT_1_80V_range/D_CELLS_HD_LP5MOS_typ_1_80V_25C.lib}
+
+# The fastest corner
+create_library_set -name FASTlib \
+-timing {/Cadence/Libs/X_FAB/XKIT/xt018/diglibs/D_CELLS_HD/v4_0/liberty_LP5MOS/v4_0_0/PVT_1_80V_range/D_CELLS_HD_LP5MOS_fast_1_98V_m40C.lib}
+
+
+## Create operating conditions (P-V-T) for the timing libraries (CAN BE ABSENT IF CONDITIONS ARE GENERAL)
+# The slowest operation condition
+create_op_cond -name PVT_slow_1_62V_175C \
+-library_file {/Cadence/Libs/X_FAB/XKIT/xt018/diglibs/D_CELLS_HD/v4_0/liberty_LP5MOS/v4_0_0/PVT_1_80V_range/D_CELLS_HD_LP5MOS_slow_1_62V_175C.lib} \
+-P {1} -V {1.62} -T {175}
+
+# Typical operation condition
+create_op_cond -name PVT_typ_1_80V_25C \
+-library_file {/Cadence/Libs/X_FAB/XKIT/xt018/diglibs/D_CELLS_HD/v4_0/liberty_LP5MOS/v4_0_0/PVT_1_80V_range/D_CELLS_HD_LP5MOS_typ_1_80V_25C.lib} \
+-P {1} -V {1.8} -T {25}
+
+# The fastest operation condition
+create_op_cond -name PVT_fast_1_98V_-40C \
+-library_file {/Cadence/Libs/X_FAB/XKIT/xt018/diglibs/D_CELLS_HD/v4_0/liberty_LP5MOS/v4_0_0/PVT_1_80V_range/D_CELLS_HD_LP5MOS_fast_1_98V_m40C.lib} \
+-P {1} -V {1.98} -T {-40}
+
+
+## Create RC corner(s) from capacitance table(s)
+create_rc_corner -name RCcornerMIN \
+-cap_table /Cadence/Libs/X_FAB/XKIT/xt018/cadence/v7_0/capTbl/v7_0_1/xt018_xx43_MET4_METMID_METTHK_min.capTbl \
+-qx_tech_file /Cadence/Libs/X_FAB/XKIT/xt018/cadence/v7_0/QRC_pvs/v7_0_3/XT018_1243/QRC-Min/qrcTechFile
+
+create_rc_corner -name RCcornerTYP \
+-cap_table /Cadence/Libs/X_FAB/XKIT/xt018/cadence/v7_0/capTbl/v7_0_1/xt018_xx43_MET4_METMID_METTHK_typ.capTbl \
+-qx_tech_file /Cadence/Libs/X_FAB/XKIT/xt018/cadence/v7_0/QRC_pvs/v7_0_3/XT018_1243/QRC-Typ/qrcTechFile
+
+create_rc_corner -name RCcornerMAX \
+-cap_table /Cadence/Libs/X_FAB/XKIT/xt018/cadence/v7_0/capTbl/v7_0_1/xt018_xx43_MET4_METMID_METTHK_max.capTbl \
+-qx_tech_file /Cadence/Libs/X_FAB/XKIT/xt018/cadence/v7_0/QRC_pvs/v7_0_3/XT018_1243/QRC-Max/qrcTechFile
+
+
+## Create delay corner(s)
+create_delay_corner -name DELAYcornerSLOW \
+-library_set SLOWlib \
+-rc_corner RCcornerMAX
+
+create_delay_corner -name DELAYcornerTYP \
+-library_set TYPlib \
+-rc_corner RCcornerTYP
+
+create_delay_corner -name DELAYcornerFAST \
+-library_set FASTlib \
+-rc_corner RCcornerMIN
+
+
+## Create analysis views
+create_analysis_view -name MAXview \
+-delay_corner {DELAYcornerSLOW} \
+-constraint_mode {CONSTRAINTS}
+
+create_analysis_view -name TYPview \
+-delay_corner {DELAYcornerTYP} \
+-constraint_mode {CONSTRAINTS}
+
+create_analysis_view -name MINview \
+-delay_corner {DELAYcornerFAST} \
+-constraint_mode {CONSTRAINTS}
+
+
+## Set analysis view to above for both setup and hold
+set_analysis_view -setup {TYPview} -hold {TYPview}