Update RUN_PAR.tcl

scripts/scripts_PaR/RUN_PAR.tcl

@@ -12,10 +12,10 @@
 
 
 ### ================= USER SETTINGS =================
-set NETLIST_TOP_NAME "PWM_syn_netlist.v";                       # RTL top module name
+set NETLIST_TOP_NAME "scr1_top_ahb_syn_netlist.v";                       # RTL top module name
 set NETLIST_PATH "../results/results_syn";                       # RTL path to the source files
 
-set PAR_SDC_TOP_NAME "PWM_syn.sdc";                             # SDC top file name
+set PAR_SDC_TOP_NAME "scr1_top_ahb_syn.sdc";                             # SDC top file name
 set PAR_SDC_PATH "../results/results_syn";                       # SDC path to the sources
 
 set PAR_MMMC_FILE "../scripts/scripts_aux/XFAB180_MMMC.tcl";                        # Multi-mode multi-corner file
@@ -28,7 +28,7 @@ set PAR_INIT_LEF_FILESET "/Cadence/Libs/X_FAB/XKIT/xt018/cadence/v7_0/techLEF/v7
 set PAR_REPORTS_FOLDER "../reports/reports_PaR";                 # Reports folder
 set PAR_RESULTS_FOLDER "../results/results_PaR";                 # Results folder
 
-set FLOORPLAN_DIMENSIONS {200 200};    # FP chip area
+set FLOORPLAN_DIMENSIONS {9000 9000};    # FP chip area
 set FLOORPLAN_MARGINS    {50 50 50 50};  #FP chip margins
 ### ================= END of USER SETTINGS =============
 

scripts/scripts_syn/RUN_SYN.tcl

@@ -9,6 +9,8 @@
 ### - cd to the main folder with the scripts, src, reports etc. (BE_ASIC_DESIGN_CADENCE_SCRIPTS folder) and then cd to the ./WORK_TMP_FOLDER
 ### - run synthesis with RTL Compiler by typing in the same terminal "RTL_Compiler ../scripts/scripts_syn/RUN_SYN.tcl"
 
+
+
 ### ================= USER SETTINGS =================
 set RTL_TOP_NAME "scr1_top_ahb";                                         # RTL top module name
 set RTL_PATH "../src/rtl";                                       # RTL path to the source files
@@ -24,6 +26,12 @@ set SYN_REPORTS_FOLDER "../reports/reports_syn";                 # Reports folde
 set SYN_RESULTS_FOLDER "../results/results_syn";                 # Results folder
 ### ================= END of USER SETTINGS ==========
 
+### ============== PROC to run synthesis ============
+### Set TRUE to enable technological mapping and results export; otherwise only elaboration is active
+#set MAPPING  "FALSE";
+set MAPPING  "TRUE";
+### ========== end of PROC to run synthesis =========
+
 
 
 ### ================= SYNTHESIS =================
@@ -33,9 +41,10 @@ include ${SYN_CORNER}
 # Read in Verilog HDL filelist for synthesis
 read_hdl -sv ${RTL_PATH}/${RTL_FILELIST_NAME}
 
-# Synthesize (elabirate, no mapping)
+# Synthesize (elaborate, no mapping)
 elaborate ${RTL_TOP_NAME}
 
+if {$MAPPING eq "TRUE"} {
    # Rear SDC constraints
    read_sdc ${SYN_SDC_PATH}/${SYN_SDC_TOP_NAME}
 
@@ -53,6 +62,7 @@ write_hdl -mapped > ${SYN_RESULTS_FOLDER}/${RTL_TOP_NAME}_syn_netlist.v
 
    # Export SDC file for the next PaR stages
    write_sdc > ${SYN_RESULTS_FOLDER}/${RTL_TOP_NAME}_syn.sdc
+}
 
 # Open RTL Compiler GUI
 gui_show