### Technology:			"X-FAB 180 nm CMOS, XT018 1243"
### Library:			"D_CELLS_HD, 1.8V"
### Tools:			"Cadence Encounter"
###
### Stage:			"PaR"
### File description:		"Multi-mode multi-corner (MMMC) file for the Cadence Encounter EDA tool"


## Timing constraints file from the synthesis
create_constraint_mode -name CONSTRAINTS -sdc_files {../Source/Constraints_synth_typ.sdc}


## Create timing libraries sets
# The slowest corner
create_library_set -name SLOWlib \
-timing {/Cadence/Libs/X_FAB/XKIT/xt018/diglibs/D_CELLS_HD/v4_0/liberty_LP5MOS/v4_0_0/PVT_1_80V_range/D_CELLS_HD_LP5MOS_slow_1_62V_175C.lib}

# Typical corner
create_library_set -name TYPlib \
-timing {/Cadence/Libs/X_FAB/XKIT/xt018/diglibs/D_CELLS_HD/v4_0/liberty_LP5MOS/v4_0_0/PVT_1_80V_range/D_CELLS_HD_LP5MOS_typ_1_80V_25C.lib}

# The fastest corner
create_library_set -name FASTlib \
-timing {/Cadence/Libs/X_FAB/XKIT/xt018/diglibs/D_CELLS_HD/v4_0/liberty_LP5MOS/v4_0_0/PVT_1_80V_range/D_CELLS_HD_LP5MOS_fast_1_98V_m40C.lib}


## Create operating conditions (P-V-T) for the timing libraries (CAN BE ABSENT IF CONDITIONS ARE GENERAL)
# The slowest operation condition
create_op_cond -name PVT_slow_1_62V_175C \
-library_file {/Cadence/Libs/X_FAB/XKIT/xt018/diglibs/D_CELLS_HD/v4_0/liberty_LP5MOS/v4_0_0/PVT_1_80V_range/D_CELLS_HD_LP5MOS_slow_1_62V_175C.lib} \
-P {1} -V {1.62} -T {175}

# Typical operation condition
create_op_cond -name PVT_typ_1_80V_25C \
-library_file {/Cadence/Libs/X_FAB/XKIT/xt018/diglibs/D_CELLS_HD/v4_0/liberty_LP5MOS/v4_0_0/PVT_1_80V_range/D_CELLS_HD_LP5MOS_typ_1_80V_25C.lib} \
-P {1} -V {1.8} -T {25}

# The fastest operation condition
create_op_cond -name PVT_fast_1_98V_-40C \
-library_file {/Cadence/Libs/X_FAB/XKIT/xt018/diglibs/D_CELLS_HD/v4_0/liberty_LP5MOS/v4_0_0/PVT_1_80V_range/D_CELLS_HD_LP5MOS_fast_1_98V_m40C.lib} \
-P {1} -V {1.98} -T {-40}


## Create RC corner(s) from capacitance table(s)
create_rc_corner -name RCcornerMIN \
-cap_table /Cadence/Libs/X_FAB/XKIT/xt018/cadence/v7_0/capTbl/v7_0_1/xt018_xx43_MET4_METMID_METTHK_min.capTbl \
-qx_tech_file /Cadence/Libs/X_FAB/XKIT/xt018/cadence/v7_0/QRC_pvs/v7_0_3/XT018_1243/QRC-Min/qrcTechFile

create_rc_corner -name RCcornerTYP \
-cap_table /Cadence/Libs/X_FAB/XKIT/xt018/cadence/v7_0/capTbl/v7_0_1/xt018_xx43_MET4_METMID_METTHK_typ.capTbl \
-qx_tech_file /Cadence/Libs/X_FAB/XKIT/xt018/cadence/v7_0/QRC_pvs/v7_0_3/XT018_1243/QRC-Typ/qrcTechFile

create_rc_corner -name RCcornerMAX \
-cap_table /Cadence/Libs/X_FAB/XKIT/xt018/cadence/v7_0/capTbl/v7_0_1/xt018_xx43_MET4_METMID_METTHK_max.capTbl \
-qx_tech_file /Cadence/Libs/X_FAB/XKIT/xt018/cadence/v7_0/QRC_pvs/v7_0_3/XT018_1243/QRC-Max/qrcTechFile


## Create delay corner(s)
create_delay_corner -name DELAYcornerSLOW \
-library_set SLOWlib \
-rc_corner RCcornerMAX

create_delay_corner -name DELAYcornerTYP \
-library_set TYPlib \
-rc_corner RCcornerTYP

create_delay_corner -name DELAYcornerFAST \
-library_set FASTlib \
-rc_corner RCcornerMIN


## Create analysis views
create_analysis_view -name MAXview \
-delay_corner {DELAYcornerSLOW} \
-constraint_mode {CONSTRAINTS}

create_analysis_view -name TYPview \
-delay_corner {DELAYcornerTYP} \
-constraint_mode {CONSTRAINTS}

create_analysis_view -name MINview \
-delay_corner {DELAYcornerFAST} \
-constraint_mode {CONSTRAINTS}


## Set analysis view to above for both setup and hold
set_analysis_view -setup {TYPview} -hold {TYPview}